Our superior cooling technology to keep your temperatures low at a high framerate
*NEW for RX 6x50 Series* High TG Copper PCB
The GPU is mounted on to the high-density 14 layer 2oz Copper and high TG PCB to match the rapid speed, high current and increased power requirement of the GPU and memory to guarantee high stability of the PCB during operation.
*NEW for RX 6x50 Series* Optimized Composite Heatpipe
The composite heatpipes are fine-tuned for each individual cooling design with optimal heat flow, efficiently and evenly spreading out the heat to the entire cooling module.
*NEW for RX 6x50 Series* Metal Backplate with Thermal Pad
The high quality aluminum backplate is not just for styling. It also protects the components on the backside of the PCB and helps dissipate the heat from the PCB with a high performance thermal pad in between.
TOXIC AIO Cooling Technology
The TOXIC AIO cooling system consists of two major parts - AIO cooler for GPU cooling & a customized die-casted heatsink with two heat pipes for VRM and Memory Cooling. To cool the GPU, the pump/heat spreader of the liquid cooling system on TOXIC effectively takes away the heat from the GPU to the 360 mm radiator for heat exchange. The hot liquid is then cooled in the radiator by three large 120mm fans and pushed back to the pump/spreader. This circulation keeps the GPU temperature less than 70°C and noise levels below 34 dBA. On the VRM and Memory cooling, the new hybrid fans blow away the heat transferred by the die-casted heatsink with heatpipes from the memory and VRM components.
TOXIC Air Cooled Tri-X Cooling Technology
The TOXIC Air Cooled Tri-X Cooling Solution is powered by three large fans to optimize wind flow efficiency. The tunneled fins on the fans aid in increasing the convection of airflow to ensure that TOXIC Air Cooled Tri-X cooling is a low temperature and low noise cooling solution.
Hybrid Fan Blade
The new hybrid fan design combines the quietness of a traditional axial fan design and strong air pressure of a blower fan design to generate an improvement in the downward air pressure through the fan while keeping the fan noise low.
Intelligent Fan Control
Fan speed is intelligently controlled to keep the GPU, memory, PWM IC and other components as low as possible in temperature to balance performance, and fan noise.
Precision Fan Control
Standard industry fans may have up to 10% difference between fan rotation cycles (RPM). The Fan IC Control on SAPPHIRE graphics cards reduce differential at approximately 3%. This up to 70% improvement on accuracy ensures that cooling and noise performance of every graphics card is up to scratch.